Abstract

This specification defines an API that allows Web application authors to spawn background workers running scripts in parallel to their main page. This allows for thread-like operation with message-passing as the coordination mechanism.

Status of This document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

Publication as a Candidate Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

If you wish to make comments regarding this document in a manner that is tracked by the W3C, please submit them via using our public bug database. If you do not have an account then you can enter feedback using this form:

Feedback Comments

Please don't use section numbers as these tend to change rapidly and make your feedback harder to understand.

(Note: Your IP address and user agent will be publicly recorded for spam prevention purposes.)

You can also e-mail feedback to public-webapps@w3.org (subscribe, archives), or whatwg@whatwg.org (subscribe, archives). All feedback is welcome.

Notifications of changes to this specification are sent along with notifications of changes to related specifications using the following mechanisms:

E-mail notifications of changes
Commit-Watchers mailing list (complete source diffs): http://lists.whatwg.org/listinfo.cgi/commit-watchers-whatwg.org
Browsable version-control record of all changes:
CVSWeb interface with side-by-side diffs: http://dev.w3.org/cvsweb/html5/
Annotated summary with unified diffs: http://html5.org/tools/web-apps-tracker
Raw Subversion interface: svn checkout http://svn.whatwg.org/webapps/

The W3C Web Applications Working Group is the W3C working group responsible for this specification's progress along the W3C Recommendation track. The Working Group expects to advance this specification to Recommendation status.

This specification is expected to advance to Proposed Recommendation by 20 October 2015. To exit the Candidate Recommendation stage, the Web Applications Working Group will need to document a sufficient level of user-agent conformance with the requirements in the specification, as measured through the Test Suite for this spec.

The following changes were made to this specification after Web Workers was published as a W3C Candidate Recommendation on 01 May 2012:

We expect the functionality specified in this CR (and the future PR/REC) will not be affected by changes to DOM4 or Web IDL as those specifications proceed to Recommendation.

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

This document is governed by the 1 September 2015 W3C Process Document.

Candidate Recommendation Exit Criteria

To exit the Candidate Recommendation (CR) stage, the following criteria must have been met:

  1. There will be at least two interoperable implementations passing all approved test cases in the test suite for this specification. An implementation is to be available (i.e. for download), shipping (i.e. not private), and not experimental (i.e. intended for a wide audience). The working group will decide when the test suite is of sufficient quality to test interoperability and will produce an implementation report (hosted together with the test suite).
  2. A minimum of three months of the CR stage will have elapsed (i.e. not until after 20 October 2015). This is to ensure that enough time is given for any remaining major errors to be caught. The CR period will be extended if implementations are slow to appear.

Table of Contents

  1. 1 Introduction
    1. 1.1 Scope
    2. 1.2 Examples
      1. 1.2.1 A background number-crunching worker
      2. 1.2.2 Worker used for background I/O
      3. 1.2.3 Shared workers introduction
      4. 1.2.4 Shared state using a shared worker
      5. 1.2.5 Delegation
    3. 1.3 Tutorials
      1. 1.3.1 Creating a dedicated worker
      2. 1.3.2 Communicating with a dedicated worker
      3. 1.3.3 Shared workers
    4. 1.4 "At-risk" Features
  2. 2 Conformance requirements
    1. 2.1 Dependencies
  3. 3 Terminology
  4. 4 Infrastructure
    1. 4.1 The global scope
      1. 4.1.1 The WorkerGlobalScope common interface
      2. 4.1.2 Dedicated workers and the DedicatedWorkerGlobalScope interface
      3. 4.1.3 Shared workers and the SharedWorkerGlobalScope interface
    2. 4.2 The event loop
    3. 4.3 The worker's lifetime
    4. 4.4 Processing model
    5. 4.5 Runtime script errors
    6. 4.6 Creating workers
      1. 4.6.1 The AbstractWorker abstract interface
      2. 4.6.2 Script settings for workers
      3. 4.6.3 Dedicated workers and the Worker interface
      4. 4.6.4 Shared workers and the SharedWorker interface
  5. 5 APIs available to workers
    1. 5.1 Importing scripts and libraries
    2. 5.2 The WorkerNavigator object
    3. 5.3 Worker locations
  6. References
  7. Acknowledgements

1 Introduction

1.1 Scope

This section is non-normative.

This specification defines an API for running scripts in the background independently of any user interface scripts.

This allows for long-running scripts that are not interrupted by scripts that respond to clicks or other user interactions, and allows long tasks to be executed without yielding to keep the page responsive.

Workers (as these background scripts are called herein) are relatively heavy-weight, and are not intended to be used in large numbers. For example, it would be inappropriate to launch one worker for each pixel of a four megapixel image. The examples below show some appropriate uses of workers.

Generally, workers are expected to be long-lived, have a high start-up performance cost, and a high per-instance memory cost.

1.2 Examples

This section is non-normative.

There are a variety of uses that workers can be put to. The following subsections show various examples of this use.

1.2.1 A background number-crunching worker

This section is non-normative.

The simplest use of workers is for performing a computationally expensive task without interrupting the user interface.

In this example, the main document spawns a worker to (naïvely) compute prime numbers, and progressively displays the most recently found prime number.

The main page is as follows:

<!DOCTYPE HTML>
<html>
 <head>
  <title>Worker example: One-core computation</title>
 </head>
 <body>
  <p>The highest prime number discovered so far is: <output id="result"></output></p>
  <script>
   var worker = new Worker('worker.js');
   worker.onmessage = function (event) {
     document.getElementById('result').textContent = event.data;
   };
  </script>
 </body>
</html>

The Worker() constructor call creates a worker and returns a Worker object representing that worker, which is used to communicate with the worker. That object's onmessage event handler allows the code to receive messages from the worker.

The worker itself is as follows:

var n = 1;
search: while (true) {
  n += 1;
  for (var i = 2; i <= Math.sqrt(n); i += 1)
    if (n % i == 0)
     continue search;
  // found a prime!
  postMessage(n);
}

The bulk of this code is simply an unoptimized search for a prime number. The postMessage() method is used to send a message back to the page when a prime is found.

View this example online.

1.2.2 Worker used for background I/O

This section is non-normative.

In this example, the main document uses two workers, one for fetching stock updates at regular intervals, and one for performing search queries that the user requests.

The main page is as follows:

<!DOCTYPE HTML>
<html>
 <head>
  <title>Worker example: Stock ticker</title>
  <script>
   // TICKER
   var symbol = 'GOOG'; // default symbol to watch
   var ticker = new Worker('ticker.js');

   // SEARCHER
   var searcher = new Worker('searcher.js');
   function search(query) {
     searcher.postMessage(query);
   }

   // SYMBOL SELECTION UI
   function select(newSymbol) {
     symbol = newSymbol;
     ticker.postMessage(symbol);
   }
  </script>
  <meta http-equiv="Refresh" content="120; URL=../">
 </head>
 <body onload="search('')">
  <p><output id="symbol"></output> <output id="value"></output></p>
  <script>
   ticker.onmessage = function (event) {
     var data = event.data.split(' ');
     document.getElementById('symbol').textContent = data[0];
     document.getElementById('value').textContent = data[1];
   };
   ticker.postMessage(symbol);
  </script>
  <p><label>Search: <input type="text" autofocus oninput="search(this.value)"></label></p>
  <ul id="results"></ul>
  <script>
   searcher.onmessage = function (event) {
     var data = event.data.split(' ');
     var results = document.getElementById('results');
     while (results.hasChildNodes()) // clear previous results
       results.removeChild(results.firstChild);
     for (var i = 0; i < data.length; i += 1) {
       // add a list item with a button for each result
       var li = document.createElement('li');
       var button = document.createElement('button');
       button.value = data[i];
       button.type = 'button';
       button.onclick = function () { select(this.value); };
       button.textContent = data[i];
       li.appendChild(button);
       results.appendChild(li);
     }
   };
  </script>
  <p>(The data in this example is not real. Try searching for "Google" or "Apple".)</p>
 </body>
</html>

The two workers use a common library for performing the actual network calls. This library is as follows:

function get(url) {
  try {
    var xhr = new XMLHttpRequest();
    xhr.open('GET', url, false);
    xhr.send();
    return xhr.responseText;
  } catch (e) {
    return ''; // turn all errors into empty results
  }
}

The stock updater worker is as follows:

importScripts('io.js');
var timer;
var symbol;
function update() {
  postMessage(symbol + ' ' + get('stock.cgi?' + symbol));
  timer = setTimeout(update, 10000);
}
onmessage = function (event) {
  if (timer)
    clearTimeout(timer);
  symbol = event.data;
  update();
};

The search query worker is as follows:

importScripts('io.js');
onmessage = function (event) {
  postMessage(get('search.cgi?' + event.data));
};

View this example online.

1.2.3 Shared workers introduction

This section is non-normative.

This section introduces shared workers using a Hello World example. Shared workers use slightly different APIs, since each worker can have multiple connections.

This first example shows how you connect to a worker and how a worker can send a message back to the page when it connects to it. Received messages are displayed in a log.

Here is the HTML page:

<!DOCTYPE HTML>
<title>Shared workers: demo 1</title>
<pre id="log">Log:</pre>
<script>
  var worker = new SharedWorker('test.js');
  var log = document.getElementById('log');
  worker.port.onmessage = function(e) { // note: not worker.onmessage!
    log.textContent += '\n' + e.data;
  }
</script>

Here is the JavaScript worker:

onconnect = function(e) {
  var port = e.ports[0];
  port.postMessage('Hello World!');
}

View this example online.


This second example extends the first one by changing two things: first, messages are received using addEventListener() instead of an event handler IDL attribute, and second, a message is sent to the worker, causing the worker to send another message in return. Received messages are again displayed in a log.

Here is the HTML page:

<!DOCTYPE HTML>
<title>Shared workers: demo 2</title>
<pre id="log">Log:</pre>
<script>
  var worker = new SharedWorker('test.js');
  var log = document.getElementById('log');
  worker.port.addEventListener('message', function(e) {
    log.textContent += '\n' + e.data;
  }, false);
  worker.port.start(); // note: need this when using addEventListener
  worker.port.postMessage('ping');
</script>

Here is the JavaScript worker:

onconnect = function(e) {
  var port = e.ports[0];
  port.postMessage('Hello World!');
  port.onmessage = function(e) {
    port.postMessage('pong'); // not e.ports[0].postMessage!
    // e.target.postMessage('pong'); would work also
  }
}

View this example online.


Finally, the example is extended to show how two pages can connect to the same worker; in this case, the second page is merely in an iframe on the first page, but the same principle would apply to an entirely separate page in a separate top-level browsing context.

Here is the outer HTML page:

<!DOCTYPE HTML>
<title>Shared workers: demo 3</title>
<pre id="log">Log:</pre>
<script>
  var worker = new SharedWorker('test.js');
  var log = document.getElementById('log');
  worker.port.addEventListener('message', function(e) {
    log.textContent += '\n' + e.data;
  }, false);
  worker.port.start();
  worker.port.postMessage('ping');
</script>
<iframe src="inner.html"></iframe>

Here is the inner HTML page:

<!DOCTYPE HTML>
<title>Shared workers: demo 3 inner frame</title>
<pre id=log>Inner log:</pre>
<script>
  var worker = new SharedWorker('test.js');
  var log = document.getElementById('log');
  worker.port.onmessage = function(e) {
   log.textContent += '\n' + e.data;
  }
</script>

Here is the JavaScript worker:

var count = 0;
onconnect = function(e) {
  count += 1;
  var port = e.ports[0];
  port.postMessage('Hello World! You are connection #' + count);
  port.onmessage = function(e) {
    port.postMessage('pong');
  }
}

View this example online.

1.2.4 Shared state using a shared worker

This section is non-normative.

In this example, multiple windows (viewers) can be opened that are all viewing the same map. All the windows share the same map information, with a single worker coordinating all the viewers. Each viewer can move around independently, but if they set any data on the map, all the viewers are updated.

The main page isn't interesting, it merely provides a way to open the viewers:

<!DOCTYPE HTML>
<html>
 <head>
  <title>Workers example: Multiviewer</title>
  <script>
   function openViewer() {
     window.open('viewer.html');
   }
  </script>
 </head>
 <body>
  <p><button type=button onclick="openViewer()">Open a new
  viewer</button></p>
  <p>Each viewer opens in a new window. You can have as many viewers
  as you like, they all view the same data.</p>
 </body>
</html>

The viewer is more involved:

<!DOCTYPE HTML>
<html>
 <head>
  <title>Workers example: Multiviewer viewer</title>
  <script>
   var worker = new SharedWorker('worker.js', 'core');

   // CONFIGURATION
   function configure(event) {
     if (event.data.substr(0, 4) != 'cfg ') return;
     var name = event.data.substr(4).split(' ', 1)[0];
     // update display to mention our name is name
     document.getElementsByTagName('h1')[0].textContent += ' ' + name;
     // no longer need this listener
     worker.port.removeEventListener('message', configure, false);
   }
   worker.port.addEventListener('message', configure, false);

   // MAP
   function paintMap(event) {
     if (event.data.substr(0, 4) != 'map ') return;
     var data = event.data.substr(4).split(',');
     // display tiles data[0] .. data[8]
     var canvas = document.getElementById('map');
     var context = canvas.getContext('2d');
     for (var y = 0; y < 3; y += 1) {
       for (var x = 0; x < 3; x += 1) {
         var tile = data[y * 3 + x];
         if (tile == '0')
           context.fillStyle = 'green';
         else 
           context.fillStyle = 'maroon';
         context.fillRect(x * 50, y * 50, 50, 50);
       }
     }
   }
   worker.port.addEventListener('message', paintMap, false);

   // PUBLIC CHAT
   function updatePublicChat(event) {
     if (event.data.substr(0, 4) != 'txt ') return;
     var name = event.data.substr(4).split(' ', 1)[0];
     var message = event.data.substr(4 + name.length + 1);
     // display "<name> message" in public chat
     var public = document.getElementById('public');
     var p = document.createElement('p');
     var n = document.createElement('button');
     n.textContent = '<' + name + '>';
     n.onclick = function () { worker.port.postMessage('msg ' + name); };
     p.appendChild(n);
     var m = document.createElement('span');
     m.textContent = message;
     p.appendChild(m);
     public.appendChild(p);
   }
   worker.port.addEventListener('message', updatePublicChat, false);

   // PRIVATE CHAT
   function startPrivateChat(event) {
     if (event.data.substr(0, 4) != 'msg ') return;
     var name = event.data.substr(4).split(' ', 1)[0];
     var port = event.ports[0];
     // display a private chat UI
     var ul = document.getElementById('private');
     var li = document.createElement('li');
     var h3 = document.createElement('h3');
     h3.textContent = 'Private chat with ' + name;
     li.appendChild(h3);
     var div = document.createElement('div');
     var addMessage = function(name, message) {
       var p = document.createElement('p');
       var n = document.createElement('strong');
       n.textContent = '<' + name + '>';
       p.appendChild(n);
       var t = document.createElement('span');
       t.textContent = message;
       p.appendChild(t);
       div.appendChild(p);
     };
     port.onmessage = function (event) {
       addMessage(name, event.data);
     };
     li.appendChild(div);
     var form = document.createElement('form');
     var p = document.createElement('p');
     var input = document.createElement('input');
     input.size = 50;
     p.appendChild(input);
     p.appendChild(document.createTextNode(' '));
     var button = document.createElement('button');
     button.textContent = 'Post';
     p.appendChild(button);
     form.onsubmit = function () {
       port.postMessage(input.value);
       addMessage('me', input.value);
       input.value = '';
       return false;
     };
     form.appendChild(p);
     li.appendChild(form);
     ul.appendChild(li);
   }
   worker.port.addEventListener('message', startPrivateChat, false);

   worker.port.start();
  </script>
 </head>
 <body>
  <h1>Viewer</h1>
  <h2>Map</h2>
  <p><canvas id="map" height=150 width=150></canvas></p>
  <p>
   <button type=button onclick="worker.port.postMessage('mov left')">Left</button>
   <button type=button onclick="worker.port.postMessage('mov up')">Up</button>
   <button type=button onclick="worker.port.postMessage('mov down')">Down</button>
   <button type=button onclick="worker.port.postMessage('mov right')">Right</button>
   <button type=button onclick="worker.port.postMessage('set 0')">Set 0</button>
   <button type=button onclick="worker.port.postMessage('set 1')">Set 1</button>
  </p>
  <h2>Public Chat</h2>
  <div id="public"></div>
  <form onsubmit="worker.port.postMessage('txt ' + message.value); message.value = ''; return false;">
   <p>
    <input type="text" name="message" size="50">
    <button>Post</button>
   </p>
  </form>
  <h2>Private Chat</h2>
  <ul id="private"></ul>
 </body>
</html>

There are several key things worth noting about the way the viewer is written.

Multiple listeners. Instead of a single message processing function, the code here attaches multiple event listeners, each one performing a quick check to see if it is relevant for the message. In this example it doesn't make much difference, but if multiple authors wanted to collaborate using a single port to communicate with a worker, it would allow for independent code instead of changes having to all be made to a single event handling function.

Registering event listeners in this way also allows you to unregister specific listeners when you are done with them, as is done with the configure() method in this example.

Finally, the worker:

var nextName = 0;
function getNextName() {
  // this could use more friendly names
  // but for now just return a number
  return nextName++;
}

var map = [
 [0, 0, 0, 0, 0, 0, 0],
 [1, 1, 0, 1, 0, 1, 1],
 [0, 1, 0, 1, 0, 0, 0],
 [0, 1, 0, 1, 0, 1, 1],
 [0, 0, 0, 1, 0, 0, 0],
 [1, 0, 0, 1, 1, 1, 1],
 [1, 1, 0, 1, 1, 0, 1],
];

function wrapX(x) {
  if (x < 0) return wrapX(x + map[0].length);
  if (x >= map[0].length) return wrapX(x - map[0].length);
  return x;
}

function wrapY(y) {
  if (y < 0) return wrapY(y + map.length);
  if (y >= map[0].length) return wrapY(y - map.length);
  return y;
}

function wrap(val, min, max) {
  if (val < min)
    return val + (max-min)+1;
  if (val > max)
    return val - (max-min)-1;
  return val;
}

function sendMapData(viewer) {
  var data = '';
  for (var y = viewer.y-1; y <= viewer.y+1; y += 1) {
    for (var x = viewer.x-1; x <= viewer.x+1; x += 1) {
      if (data != '')
        data += ',';
      data += map[wrap(y, 0, map[0].length-1)][wrap(x, 0, map.length-1)];
    }
  }
  viewer.port.postMessage('map ' + data);
}

var viewers = {};
onconnect = function (event) {
  var name = getNextName();
  event.ports[0]._data = { port: event.ports[0], name: name, x: 0, y: 0, };
  viewers[name] = event.ports[0]._data;
  event.ports[0].postMessage('cfg ' + name);
  event.ports[0].onmessage = getMessage;
  sendMapData(event.ports[0]._data);
};

function getMessage(event) {
  switch (event.data.substr(0, 4)) {
    case 'mov ':
      var direction = event.data.substr(4);
      var dx = 0;
      var dy = 0;
      switch (direction) {
        case 'up': dy = -1; break;
        case 'down': dy = 1; break;
        case 'left': dx = -1; break;
        case 'right': dx = 1; break;
      }
      event.target._data.x = wrapX(event.target._data.x + dx);
      event.target._data.y = wrapY(event.target._data.y + dy);
      sendMapData(event.target._data);
      break;
    case 'set ':
      var value = event.data.substr(4);
      map[event.target._data.y][event.target._data.x] = value;
      for (var viewer in viewers)
        sendMapData(viewers[viewer]);
      break;
    case 'txt ':
      var name = event.target._data.name;
      var message = event.data.substr(4);
      for (var viewer in viewers)
        viewers[viewer].port.postMessage('txt ' + name + ' ' + message);
      break;
    case 'msg ':
      var party1 = event.target._data;
      var party2 = viewers[event.data.substr(4).split(' ', 1)[0]];
      if (party2) {
        var channel = new MessageChannel();
        party1.port.postMessage('msg ' + party2.name, [channel.port1]);
        party2.port.postMessage('msg ' + party1.name, [channel.port2]);
      }
      break;
  }
}

Connecting to multiple pages. The script uses the onconnect event listener to listen for multiple connections.

Direct channels. When the worker receives a "msg" message from one viewer naming another viewer, it sets up a direct connection between the two, so that the two viewers can communicate directly without the worker having to proxy all the messages.

View this example online.

1.2.5 Delegation

This section is non-normative.

With multicore CPUs becoming prevalent, one way to obtain better performance is to split computationally expensive tasks amongst multiple workers. In this example, a computationally expensive task that is to be performed for every number from 1 to 10,000,000 is farmed out to ten subworkers.

The main page is as follows, it just reports the result:

<!DOCTYPE HTML>
<html>
 <head>
  <title>Worker example: Multicore computation</title>
 </head>
 <body>
  <p>Result: <output id="result"></output></p>
  <script>
   var worker = new Worker('worker.js');
   worker.onmessage = function (event) {
     document.getElementById('result').textContent = event.data;
   };
  </script>
 </body>
</html>

The worker itself is as follows:

// settings
var num_workers = 10;
var items_per_worker = 1000000;

// start the workers
var result = 0;
var pending_workers = num_workers;
for (var i = 0; i < num_workers; i += 1) {
  var worker = new Worker('core.js');
  worker.postMessage(i * items_per_worker);
  worker.postMessage((i+1) * items_per_worker);
  worker.onmessage = storeResult;
}

// handle the results
function storeResult(event) {
  result += 1*event.data;
  pending_workers -= 1;
  if (pending_workers <= 0)
    postMessage(result); // finished!
}

It consists of a loop to start the subworkers, and then a handler that waits for all the subworkers to respond.

The subworkers are implemented as follows:

var start;
onmessage = getStart;
function getStart(event) {
  start = 1*event.data;
  onmessage = getEnd;
}

var end;
function getEnd(event) {
  end = 1*event.data;
  onmessage = null;
  work();
}

function work() {
  var result = 0;
  for (var i = start; i < end; i += 1) {
    // perform some complex calculation here
    result += 1;
  }
  postMessage(result);
  close();
}

They receive two numbers in two events, perform the computation for the range of numbers thus specified, and then report the result back to the parent.

View this example online.

1.3 Tutorials

1.3.1 Creating a dedicated worker

This section is non-normative.

Creating a worker requires a URL to a JavaScript file. The Worker() constructor is invoked with the URL to that file as its only argument; a worker is then created and returned:

var worker = new Worker('helper.js');

1.3.2 Communicating with a dedicated worker

This section is non-normative.

Dedicated workers use MessagePort objects behind the scenes, and thus support all the same features, such as sending structured data, transferring binary data, and transferring other ports.

To receive messages from a dedicated worker, use the onmessage event handler IDL attribute on the Worker object:

worker.onmessage = function (event) { ... };

You can also use the addEventListener() method.

The implicit MessagePort used by dedicated workers has its port message queue implicitly enabled when it is created, so there is no equivalent to the MessagePort interface's start() method on the Worker interface.

To send data to a worker, use the postMessage() method. Structured data can be sent over this communication channel. To send ArrayBuffer objects efficiently (by transferring them rather than cloning them), list them in an array in the second argument.

worker.postMessage({
  operation: 'find-edges',
  input: buffer, // an ArrayBuffer object
  threshold: 0.6,
}, [buffer]);

To receive a message inside the worker, the onmessage event handler IDL attribute is used.

onmessage = function (event) { ... };

You can again also use the addEventListener() method.

In either case, the data is provided in the event object's data attribute.

To send messages back, you again use postMessage(). It supports the structured data in the same manner.

postMessage(event.data.input, [event.data.input]); // transfer the buffer back

1.3.3 Shared workers

This section is non-normative.

Shared workers are identified by the URL of the script used to create it, optionally with an explicit name. The name allows multiple instances of a particular shared worker to be started.

Shared workers are scoped by origin. Two different sites using the same names will not collide. However, if a page tries to use the same shared worker name as another page on the same site, but with a different script URL, it will fail.

Creating shared workers is done using the SharedWorker() constructor. This constructor takes the URL to the script to use for its first argument, and the name of the worker, if any, as the second argument.

var worker = new SharedWorker('service.js');

Communicating with shared workers is done with explicit MessagePort objects. The object returned by the SharedWorker() constructor holds a reference to the port on its port attribute.

worker.port.onmessage = function (event) { ... };
worker.port.postMessage('some message');
worker.port.postMessage({ foo: 'structured', bar: ['data', 'also', 'possible']});

Inside the shared worker, new clients of the worker are announced using the connect event. The port for the new client is given by the event object's source attribute.

onconnect = function (event) {
  var newPort = event.source;
  // set up a listener
  newPort.onmessage = function (event) { ... };
  // send a message back to the port
  newPort.postMessage('ready!'); // can also send structured data, of course
};

1.4 "At-risk" Features

The following features are at risk and may be removed due to lack of implementation.

2 Conformance requirements

All diagrams, examples, and notes in this specification are non-normative, as are all sections explicitly marked non-normative. Everything else in this specification is normative.

The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in the normative parts of this document are to be interpreted as described in RFC2119. For readability, these words do not appear in all uppercase letters in this specification. [RFC2119]

Requirements phrased in the imperative as part of algorithms (such as "strip any leading space characters" or "return false and abort these steps") are to be interpreted with the meaning of the key word ("must", "should", "may", etc) used in introducing the algorithm.

Some conformance requirements are phrased as requirements on attributes, methods or objects. Such requirements are to be interpreted as requirements on user agents.

Conformance requirements phrased as algorithms or specific steps may be implemented in any manner, so long as the end result is equivalent. (In particular, the algorithms defined in this specification are intended to be easy to follow, and not intended to be performant.)

The only conformance class defined by this specification is user agents.

User agents may impose implementation-specific limits on otherwise unconstrained inputs, e.g. to prevent denial of service attacks, to guard against running out of memory, or to work around platform-specific limitations.

When support for a feature is disabled (e.g. as an emergency measure to mitigate a security problem, or to aid in development, or for performance reasons), user agents must act as if they had no support for the feature whatsoever, and as if the feature was not mentioned in this specification. For example, if a particular feature is accessed via an attribute in a Web IDL interface, the attribute itself would be omitted from the objects that implement that interface — leaving the attribute on the object but making it return null or throw an exception is insufficient.

2.1 Dependencies

This specification relies on several other underlying specifications.

HTML

Many fundamental concepts from HTML are used by this specification. [HTML]

WebIDL

The IDL blocks in this specification use the semantics of the WebIDL specification. [WEBIDL]

3 Terminology

The construction "a Foo object", where Foo is actually an interface, is sometimes used instead of the more accurate "an object implementing the interface Foo".

The term DOM is used to refer to the API set made available to scripts in Web applications, and does not necessarily imply the existence of an actual Document object or of any other Node objects as defined in the DOM Core specifications. [DOM]

An IDL attribute is said to be getting when its value is being retrieved (e.g. by author script), and is said to be setting when a new value is assigned to it.

The term "JavaScript" is used to refer to ECMA262, rather than the official term ECMAScript, since the term JavaScript is more widely known. [ECMA262]

4 Infrastructure

There are two kinds of workers; dedicated workers, and shared workers. Dedicated workers, once created, and are linked to their creator; but message ports can be used to communicate from a dedicated worker to multiple other browsing contexts or workers. Shared workers, on the other hand, are named, and once created any script running in the same origin can obtain a reference to that worker and communicate with it.

4.1 The global scope

The global scope is the "inside" of a worker.

4.1.1 The WorkerGlobalScope common interface

[Exposed=Worker] interface WorkerGlobalScope : EventTarget {
  readonly attribute WorkerGlobalScope self;
  readonly attribute WorkerLocation location;

  void close();
  attribute OnErrorEventHandler onerror;
  attribute EventHandler onlanguagechange;
  attribute EventHandler onoffline;
  attribute EventHandler ononline;

  // also has additional members in a partial interface
};

The self attribute must return the WorkerGlobalScope object itself.

The location attribute must return the WorkerLocation object created for the WorkerGlobalScope object when the worker was created. It represents the absolute URL of the script that was used to initialize the worker, after any redirects.


When a script invokes the close() method on a WorkerGlobalScope object, the user agent must run the following steps (atomically):

  1. Discard any tasks that have been added to the WorkerGlobalScope object's event loop's task queues.

  2. Set the worker's WorkerGlobalScope object's closing flag to true. (This prevents any further tasks from being queued.)

The following are the event handlers (and their corresponding event handler event types) that must be supported, as event handler IDL attributes, by objects implementing the WorkerGlobalScope interface:

Event handler Event handler event type
onerror error
onlanguagechange languagechange
onoffline offline
ononline online

For data: URLs, this is the origin specified by the entry settings object when the constructor was called. For other URLs, this is the origin of the value of the absolute URL given in the worker's location attribute.

4.1.2 Dedicated workers and the DedicatedWorkerGlobalScope interface

[Global=(Worker,DedicatedWorker),Exposed=DedicatedWorker]
/*sealed*/ interface DedicatedWorkerGlobalScope : WorkerGlobalScope {
  void postMessage(any message, optional sequence<Transferable> transfer);
  attribute EventHandler onmessage;
};

DedicatedWorkerGlobalScope objects act as if they had an implicit MessagePort associated with them. This port is part of a channel that is set up when the worker is created, but it is not exposed. This object must never be garbage collected before the DedicatedWorkerGlobalScope object.

All messages received by that port must immediately be retargeted at the DedicatedWorkerGlobalScope object.

The postMessage() method on DedicatedWorkerGlobalScope objects must act as if, when invoked, it immediately invoked the method of the same name on the port, with the same arguments, and returned the same return value.

The following are the event handlers (and their corresponding event handler event types) that must be supported, as event handler IDL attributes, by objects implementing the DedicatedWorkerGlobalScope interface:

Event handler Event handler event type
onmessage message

For the purposes of the application cache networking model, a dedicated worker is an extension of the cache host from which it was created.

4.1.3 Shared workers and the SharedWorkerGlobalScope interface

[Global=(Worker,SharedWorker),Exposed=SharedWorker]
/*sealed*/ interface SharedWorkerGlobalScope : WorkerGlobalScope {
  readonly attribute DOMString name;
  readonly attribute ApplicationCache applicationCache;
  attribute EventHandler onconnect;
};

Shared workers receive message ports through connect events on their SharedWorkerGlobalScope object for each connection.

The name attribute must return the value it was assigned when the SharedWorkerGlobalScope object was created by the "run a worker" algorithm. Its value represents the name that can be used to obtain a reference to the worker using the SharedWorker constructor.

The following are the event handlers (and their corresponding event handler event types) that must be supported, as event handler IDL attributes, by objects implementing the SharedWorkerGlobalScope interface:

Event handler Event handler event type
onconnect connect

For the purposes of the application cache networking model, a shared worker is its own cache host. The run a worker algorithm takes care of associating the worker with an application cache.

The applicationCache attribute returns the ApplicationCache object for the worker.

4.2 The event loop

Each WorkerGlobalScope object has a distinct event loop, separate from those used by units of related similar-origin browsing contexts. This event loop has no associated browsing context, and its task queues only have events, callbacks, and networking activity as tasks. These event loops are created by the run a worker algorithm.

Each WorkerGlobalScope object also has a closing flag, which must initially be false, but which can get set to true by the algorithms in the processing model section below.

Once the WorkerGlobalScope's closing flag is set to true, the event loop's task queues must discard any further tasks that would be added to them (tasks already on the queue are unaffected except where otherwise specified). Effectively, once the closing flag is true, timers stop firing, notifications for all pending background operations are dropped, etc.

4.3 The worker's lifetime

Workers communicate with other workers and with browsing contexts through message channels and their MessagePort objects.

Each WorkerGlobalScope worker global scope has a list of the worker's ports, which consists of all the MessagePort objects that are entangled with another port and that have one (but only one) port owned by worker global scope. This list includes the implicit MessagePort in the case of dedicated workers.

Each WorkerGlobalScope also has a list of the worker's workers. Initially this list is empty; it is populated when the worker creates or obtains further workers.

Finally, each WorkerGlobalScope also has a list of the worker's Documents. Initially this list is empty; it is populated when the worker is created.

Whenever a Document d is added to the worker's Documents, the user agent must, for each worker q in the list of the worker's workers whose list of the worker's Documents does not contain d, add d to q's WorkerGlobalScope owner's list of the worker's Documents.

Whenever a Document object is discarded, it must be removed from the list of the worker's Documents of each worker whose list contains that Document.

Given a settings object o when creating or obtaining a worker, the list of relevant Document objects to add depends on the type of global object specified by o's. If o specifies a global object that is a WorkerGlobalScope object (i.e. if we are creating a nested worker), then the relevant Documents are the the worker's Documents of the global object specified by o. Otherwise, o specifies a global object that is a Window object, and the relevant Document is just the responsible document specified by o.


A worker is said to be a permissible worker if its list of the worker's Documents is not empty, or if its list has been empty for no more than a short user-agent-defined timeout value, its WorkerGlobalScope is actually a SharedWorkerGlobalScope object (i.e. the worker is a shared worker), and the user agent has a browsing context whose Document is not complete loaded.

The second part of this definition allows a shared worker to survive for a short time while a page is loading, in case that page is going to contact the shared worker again. This can be used by user agents as a way to avoid the cost of restarting a shared worker used by a site when the user is navigating from page to page within that site.

A worker is said to be an active needed worker if any of the Document objects in the worker's Documents are fully active.

A worker is said to be a protected worker if it is an active needed worker and either it has outstanding timers, database transactions, or network connections, or its list of the worker's ports is not empty, or its WorkerGlobalScope is actually a SharedWorkerGlobalScope object (i.e. the worker is a shared worker).

A worker is said to be a suspendable worker if it is not an active needed worker but it is a permissible worker.

4.4 Processing model

When a user agent is to run a worker for a script with URL url, an environment settings object settings object, and a URL referrer it must run the following steps:

  1. Create a separate parallel execution environment (i.e. a separate thread or process or equivalent construct), and run the rest of these steps in that context.

    For the purposes of timing APIs, this is the official moment of creation of the worker.

  2. Let worker global scope be the global object specified by settings object.

  3. If worker global scope is actually a SharedWorkerGlobalScope object (i.e. the worker is a shared worker), and there are any relevant application caches that are identified by a manifest URL with the same origin as url and that have url as one of their entries, not excluding entries marked as foreign, then associate the worker global scope with the most appropriate application cache of those that match.

  4. Let request be a new request whose url is url, client is settings object, type is "script", destination is "worker" if worker global scope is a DedicatedWorkerGlobalScope object and "sharedworker" otherwise, referrer is referrer, synchronous flag is set, mode is "same-origin", credentials mode is "same-origin", and whose use-URL-credentials flag is set.

  5. Let response be the result of fetching request.

  6. If response response's status is an ok status, then let source be the result of running the UTF-8 decode algorithm on response's body.

    Let language be JavaScript.

    As with script elements, the MIME type of the script is ignored. Unlike with script elements, there is no way to override the type. It's always assumed to be JavaScript.

  7. Otherwise, then for each Worker or SharedWorker object associated with worker global scope, queue a task to fire a simple event named error at that object. Abort these steps.

  8. In the newly created execution environment, create a JavaScript global environment whose global object is worker global scope. If worker global scope is a DedicatedWorkerGlobalScope object, then this is a dedicated worker environment. Otherwise, worker global scope is a SharedWorkerGlobalScope object, and this is a shared worker environment. (In either case, by definition, it is a worker environment.)

  9. Let script be a new script.

    Obtain the appropriate script execution environment for the scripting language language from settings object.

    Parse/compile/initialise source using that script execution environment, as appropriate for language, and thus obtain a code entry-point. If the script was not compiled successfully, let the code entry-point be a no-op script, and act as if a corresponding uncaught script error had occurred.

    Let script's settings object be settings object.

  10. Closing orphan workers: Start monitoring the worker such that no sooner than it stops being a protected worker, and no later than it stops being a permissible worker, worker global scope's closing flag is set to true.

  11. Suspending workers: Start monitoring the worker, such that whenever worker global scope's closing flag is false and the worker is a suspendable worker, the user agent suspends execution of script in that worker until such time as either the closing flag switches to true or the worker stops being a suspendable worker.

  12. Jump to the script's code entry-point, and let that run until it either returns, fails to catch an exception, or gets prematurely aborted by the "kill a worker" or "terminate a worker" algorithms defined below.

  13. If worker global scope is actually a DedicatedWorkerGlobalScope object (i.e. the worker is a dedicated worker), then enable the port message queue of the worker's implicit port.

  14. Event loop: Run the responsible event loop specified by settings object until it is destroyed.

    The handling of events or the execution of callbacks by tasks run by the event loop might get prematurely aborted by the "kill a worker" or "terminate a worker" algorithms defined below.

    The worker processing model remains on this step until the event loop is destroyed, which happens after the closing flag is set to true, as described in the event loop processing model.

  15. Empty the worker global scope's list of active timers.

  16. Disentangle all the ports in the list of the worker's ports.

  17. Empty the worker's list of the worker's Documents.


When a user agent is to kill a worker it must run the following steps in parallel with the worker's main loop (the "run a worker" processing model defined above):

  1. Set the worker's WorkerGlobalScope object's closing flag to true.

  2. If there are any tasks queued in the WorkerGlobalScope object's event loop's task queues, discard them without processing them.

  3. Wait a user-agent-defined amount of time.

  4. Abort the script currently running in the worker.

User agents may invoke the "kill a worker" processing model on a worker at any time, e.g. in response to user requests, in response to CPU quota management, or when a worker stops being an active needed worker if the worker continues executing even after its closing flag was set to true.


When a user agent is to terminate a worker it must run the following steps in parallel with the worker's main loop (the "run a worker" processing model defined above):

  1. Set the worker's WorkerGlobalScope object's closing flag to true.

  2. If there are any tasks queued in the WorkerGlobalScope object's event loop's task queues, discard them without processing them.

  3. Abort the script currently running in the worker.

  4. If the worker's WorkerGlobalScope object is actually a DedicatedWorkerGlobalScope object (i.e. the worker is a dedicated worker), then empty the port message queue of the port that the worker's implicit port is entangled with.


The task source for the tasks mentioned above is the DOM manipulation task source.

4.5 Runtime script errors

Whenever an uncaught runtime script error occurs in one of the worker's scripts, if the error did not occur while handling a previous script error, the user agent must report the error for that script, with the position (line number and column number) where the error occurred, using the WorkerGlobalScope object as the target.

For shared workers, if the error is still not handled afterwards, the error may be reported to the user.

For dedicated workers, if the error is still not handled afterwards, the user agent must queue a task to fire a trusted event that uses the ErrorEvent interface, with the name error, that doesn't bubble and is cancelable, with its message, filename, lineno, colno, attributes initialised appropriately, and with the error attribute initialised to null, at the Worker object associated with the worker. If the event is not canceled, the user agent must act as if the uncaught runtime script error had occurred in the global scope that the Worker object is in, thus repeating the entire runtime script error reporting process one level up.

If the implicit port connecting the worker to its Worker object has been disentangled (i.e. if the parent worker has been terminated), then the user agent must act as if the Worker object had no error event handler and as if that worker's onerror attribute was null, but must otherwise act as described above.

Thus, error reports propagate up to the chain of dedicated workers up to the original Document, even if some of the workers along this chain have been terminated and garbage collected.

The task source for the task mentioned above is the DOM manipulation task source.

4.6 Creating workers

4.6.1 The AbstractWorker abstract interface

[NoInterfaceObject, Exposed=(Window,Worker)]
interface AbstractWorker {
    attribute EventHandler onerror;
};

The following are the event handlers (and their corresponding event handler event types) that must be supported, as event handler IDL attributes, by objects implementing the AbstractWorker interface:

Event handler Event handler event type
onerror error

4.6.2 Script settings for workers

When the user agent is required to set up a worker environment settings object, given a worker global scope and a URL script address, it must run the following steps:

  1. Let inherited responsible browsing context be the responsible browsing context specified by the incumbent settings object.

  2. Let inherited origin be the origin specified by the incumbent settings object.

  3. Let worker event loop be a newly created event loop.

  4. Let settings object be a new environment settings object whose algorithms are defined as follows:

    The script execution environments

    When the environment settings object is created, for each language supported by the user agent, create an appropriate execution environment as defined by the relevant specification.

    When a script execution environment is needed, return the appropriate one from those created when the environment settings object was created.

    Currently, workers only support JavaScript, so only a JavaScript execution environment is actually needed here.

    The global object

    Return worker global scope.

    The responsible browsing context

    Return inherited responsible browsing context.

    The responsible event loop

    Return worker event loop.

    The responsible document

    Not applicable (the responsible event loop is not a browsing context event loop).

    The API URL character encoding

    Return UTF-8.

    The API base URL

    Return script address.

    The origin and effective script origin

    Return inherited origin.

    The creation URL

    Return script address.

  5. Return settings object.

4.6.3 Dedicated workers and the Worker interface

[Constructor(DOMString scriptURL), Exposed=(Window,Worker)]
interface Worker : EventTarget {
  void terminate();

  void postMessage(any message, optional sequence<Transferable> transfer);
  attribute EventHandler onmessage;
};
Worker implements AbstractWorker;

The terminate() method, when invoked, must cause the "terminate a worker" algorithm to be run on the worker with which the object is associated.

Worker objects act as if they had an implicit MessagePort associated with them. This port is part of a channel that is set up when the worker is created, but it is not exposed. This object must never be garbage collected before the Worker object.

All messages received by that port must immediately be retargeted at the Worker object.

The postMessage() method on Worker objects must act as if, when invoked, it immediately invoked the method of the same name on the port, with the same arguments, and returned the same return value.

The postMessage() method's first argument can be structured data:

worker.postMessage({opcode: 'activate', device: 1938, parameters: [23, 102]});

The following are the event handlers (and their corresponding event handler event types) that must be supported, as event handler IDL attributes, by objects implementing the Worker interface:

Event handler Event handler event type
onmessage message

When the Worker(scriptURL) constructor is invoked, the user agent must run the following steps:

  1. The user agent may throw a SecurityError exception and abort these steps if the request violates a policy decision (e.g. if the user agent is configured to not allow the page to start dedicated workers).

  2. Resolve the scriptURL argument relative to the API base URL specified by the entry settings object when the method was invoked.

  3. If this fails, throw a SyntaxError exception and abort these steps.

  4. Let worker URL be the resulting absolute URL.

  5. If the scheme component of worker URL is not "data", and the origin of worker URL is not the same as the origin specified by the incumbent settings object, then throw a SecurityError exception and abort these steps.

    For example, scripts can be external files with the same scheme, host, and port as the original page, or data: URLs, or same-origin blob: URLs. Thus, an https: page couldn't start workers using scripts with http: URLs. [FILEAPI].

  6. Create a new DedicatedWorkerGlobalScope object. Let worker global scope be this new object.

  7. Set up a worker environment settings object with worker global scope and worker URL, and let settings object be the result.

  8. Create a new Worker object, associated with worker global scope. Let worker be this new object.

  9. Create a new MessagePort object whose owner is the incumbent settings object. Let this be the outside port.

  10. Associate the outside port with worker.

  11. Create a new MessagePort object whose owner is settings object. Let inside port be this new object.

  12. Associate inside port with worker global scope.

  13. Entangle outside port and inside port.

  14. Return worker, and run the following steps in parallel.

  15. Enable outside port's port message queue.

  16. Let docs be the list of relevant Document objects to add given the incumbent settings object.

  17. Add to worker global scope's list of the worker's Documents the Document objects in docs.

  18. If the global object specified by the incumbent settings object is a WorkerGlobalScope object (i.e. we are creating a nested worker), add worker global scope to the list of the worker's workers of the WorkerGlobalScope object that is the global object specified by the incumbent settings object.

  19. Run a worker for the script with URL worker URL, the environment settings object settings object, and with incumbent settings object's creation URL.

4.6.4 Shared workers and the SharedWorker interface

[Constructor(DOMString scriptURL, optional DOMString name), Exposed=(Window,Worker)]
interface SharedWorker : EventTarget {
  readonly attribute MessagePort port;
};
SharedWorker implements AbstractWorker;

The port attribute must return the value it was assigned by the object's constructor. It represents the MessagePort for communicating with the shared worker.

When the SharedWorker(scriptURL, name) constructor is invoked, the user agent must run the following steps:

  1. The user agent may throw a SecurityError exception and abort these steps if the request violates a policy decision (e.g. if the user agent is configured to not allow the page to start shared workers).

  2. Resolve the scriptURL argument.

  3. If this fails, throw a SyntaxError exception and abort these steps.

  4. Let scriptURL be the resulting absolute URL and parsed scriptURL be the resulting parsed URL.

  5. Let name be the value of the second argument, or the empty string if the second argument was omitted.

  6. If the scheme component of parsed scriptURL is not "data", and the origin of scriptURL is not the same as the origin specified by the incumbent settings object, then throw a SecurityError exception and abort these steps.

    Thus, scripts must either be external files with the same scheme, host, and port as the original page, or data: URLs. For example, an https: page couldn't start workers using scripts with http: URLs.

  7. Let docs be the list of relevant Document objects to add given the incumbent settings object.

  8. Execute the following substeps atomically:

    1. Create a new SharedWorker object, which will shortly be associated with a SharedWorkerGlobalScope object. Let this SharedWorker object be worker.

    2. Create a new MessagePort object whose owner is the incumbent settings object. Let this be the outside port.

    3. Assign outside port to the port attribute of worker.

    4. Let worker global scope be null.

    5. If name is not the empty string and there exists a SharedWorkerGlobalScope object whose closing flag is false, whose name attribute is exactly equal to name, and that is the global object specified by an environment settings object that specifies as its origin the same origin as the origin of scriptURL, then let worker global scope be that SharedWorkerGlobalScope object.

      Otherwise, if name is the empty string and there exists a SharedWorkerGlobalScope object whose closing flag is false, whose name attribute is the empty string, and whose location attribute represents an absolute URL that is exactly equal to scriptURL, then let worker global scope be that SharedWorkerGlobalScope object.

    6. If worker global scope is not null, but the user agent has been configured to disallow communication between the worker represented by the worker global scope and the scripts whose settings objects are the incumbent settings object, then set worker global scope to null.

      For example, a user agent could have a development mode that isolates a particular top-level browsing context from all other pages, and scripts in that development mode could be blocked from connecting to shared workers running in the normal browser mode.

    7. If worker global scope is not null, then run these steps:

      1. If worker global scope's location attribute represents an absolute URL that is not exactly equal to scriptURL, then throw a URLMismatchError exception and abort all these steps.

      2. Associate worker with worker global scope.

      3. Let settings object be the environment settings object whose global object is worker global scope.

      4. Create a new MessagePort object whose owner is settings object. Let this be the inside port.

      5. Entangle outside port and inside port.

      6. Create a trusted event that uses the MessageEvent interface, with the name connect, which does not bubble, is not cancelable, has no default action, has a data attribute whose value is initialised to the empty string, has a ports attribute whose value is initialised to a read only array containing only the newly created port, and has a source attribute whose value is initialised to the newly created port, and queue a task to dispatch the event at worker global scope.

      7. Add to worker global scope's list of the worker's Documents the Document objects in docs.

      8. If the global object specified by the incumbent settings object is a WorkerGlobalScope object, add worker global scope to the list of the worker's workers of the WorkerGlobalScope object that is the global object specified by the incumbent settings object.

      9. Return worker and abort all these steps.

    8. Create a new SharedWorkerGlobalScope object. Let worker global scope be this new object.

    9. Set up a worker environment settings object with worker global scope and scriptURL, and let settings object be the result.

    10. Associate worker with worker global scope.

    11. Set the name attribute of worker global scope to name.

    12. Create a new MessagePort object whose owner is settings object. Let inside port be this new object.

    13. Entangle outside port and inside port.

  9. Return worker and perform the remaining steps in parallel.

  10. Create a trusted event that uses the MessageEvent interface, with the name connect, which does not bubble, is not cancelable, has no default action, has a data attribute whose value is initialised to the empty string, has a ports attribute whose value is initialised to a read only array containing only the newly created port, and has a source attribute whose value is initialized to the newly created port, and queue a task to dispatch the event at worker global scope.

  11. Add to worker global scope's list of the worker's Documents the Document objects in docs.

  12. If the global object specified by the incumbent settings object is a WorkerGlobalScope object, add worker global scope to the list of the worker's workers of the WorkerGlobalScope object that is the global object specified by the incumbent settings object.

  13. Run a worker for the script with URL scriptURL, the environment settings object settings object, and with the incumbent settings object's creation URL.

The task source for the tasks mentioned above is the DOM manipulation task source.

5 APIs available to workers

[Exposed=Worker]
partial interface WorkerGlobalScope { // not obsolete
  void importScripts(DOMString... urls);
  readonly attribute WorkerNavigator navigator;
};
WorkerGlobalScope implements WindowTimers;
WorkerGlobalScope implements WindowBase64;

5.1 Importing scripts and libraries

When a script invokes the importScripts(urls) method on a WorkerGlobalScope object, the user agent must import scripts into worker global scope, with the following options:

The import scripts into worker global scope algorithm has three hooks for algorithm steps that may be customized by any callers: validate the state, get a fetch result, and postprocess the fetch result.

To import scripts into worker global scope, the user agent must run the following steps:

  1. Let settings object be the incumbent settings object.

  2. Validate the state.

  3. If there are no arguments, return without doing anything. Abort these steps.

  4. Resolve each argument relative to settings object's API base URL.

  5. If any fail, throw a SyntaxError exception and abort these steps.

  6. For each url in the resulting absolute URLs, run these substeps:

    1. Get a fetch result.

    2. Postprocess the fetch result.

    3. Let source be the result of running the UTF-8 decode algorithm on the script resource.

      Let language be JavaScript.

      As with the worker's script, the script here is always assumed to be JavaScript, regardless of the MIME type.

    4. Create a script using source as the script source, the URL from which source was obtained, language as the scripting language, and settings object as the environment settings object.

      If the script came from a resource whose URL does not have the same origin as the origin specified by the incumbent settings object, then pass the muted errors flag to the create a script algorithm as well.

      Let the newly created script run until it either returns, fails to parse, fails to catch an exception, or gets prematurely aborted by the "kill a worker" or "terminate a worker" algorithms defined above.

      If it failed to parse, then throw an ECMAScript SyntaxError exception and abort all these steps. [ECMA262]

      If an exception was thrown or if the script was prematurely aborted, then abort all these steps, letting the exception or aborting continue to be processed by the calling script.

      If the "kill a worker" or "terminate a worker" algorithms abort the script then abort all these steps.

The Service Workers specification is an example of a specification that runs this algorithm with its own options for the hooks. [SW]

5.2 The WorkerNavigator object

The navigator attribute of the WorkerGlobalScope interface must return an instance of the WorkerNavigator interface, which represents the identity and state of the user agent (the client):

[Exposed=Worker]
interface WorkerNavigator {};
WorkerNavigator implements NavigatorID;
WorkerNavigator implements NavigatorLanguage;
WorkerNavigator implements NavigatorOnLine;

5.3 Worker locations

[Exposed=Worker]
interface WorkerLocation { };
WorkerLocation implements URLUtilsReadOnly;

A WorkerLocation object represents an absolute URL set at its creation.

The WorkerLocation interface supports the URLUtilsReadOnly interface. [URL]

When the object is created, the user agent must invoke the element's URLUtilsReadOnly interface's set the input algorithm with the absolute URL that the WorkerLocation object represents as the given value.

The element's URLUtilsReadOnly interface's get the base algorithm must return null.

References

All references are normative unless marked "Non-normative".

[DOM4]
Anne van Kesteren; Aryeh Gregor; Ms2ger; Alex Russell; Robin Berjon. W3C DOM4. 10 July 2014. W3C Last Call Working Draft. URL: http://www.w3.org/TR/dom/
[ECMA262]
ECMAScript Language Specification. ECMA.
[HTML]
Ian Hickson; Robin Berjon; Steve Faulkner; Travis Leithead; Erika Doyle Navara; Edward O'Connor; Silvia Pfeiffer. HTML5. 28 October 2014. W3C Recommendation. URL: http://www.w3.org/TR/html5/
[RFC2119]
Key words for use in RFCs to Indicate Requirement Levels, S. Bradner. IETF.
[WEBIDL]
Cameron McCormack; Boris Zbarsky; Yves Lafon; Travis Leithead. WebIDL Level 1. 04 August 2015. W3C Working Draft. URL: http://www.w3.org/TR/WebIDL-1/
[URL]
E. Arvidsson; M.[tm] Smith. URL. 9 December 2014. W3C Working Draft. URL: http://www.w3.org/TR/url/
[XHR]
(Non-normative) XMLHttpRequest, Living Standard. WHATWG.
[SW]
Alex Russell; Jungkee Song; Jake Archibald. (Non-normative) Service Workers, 25 June 2015. W3C Working Draft.

Acknowledgements

Thanks to Aaron Boodman, Алексей Проскуряков (Alexey Proskuryakov), Anne van Kesteren, Ben Turner, Dmitry Titov, Drew Wilson, Jeremy Orlow, Jonas Sicking, Justin James, Kevin Hakanson, Maciej Stachowiak, Michael Nordman, Mike Smith, and Philip Taylor for their useful and substantial comments.

Huge thanks to the whole Gears team, who pioneered this technology and whose experience has been a huge influence on this specification.